|
Highlight
|
|
|
Four 12Gb/s SFF-8644 and expansion connections
|
|
|
|
|
|
LED activity/status in each drive carrier
|
|
Daisy chain capacity expansion for additional
|
|
ARC-4038
|
|
Plug & Play add capacity without shutting down
|
|
Support CLI for configuration and environmental
|
|
information
|
|
|
|
|
Features
|
|
Drives
|
SAS hard drives
|
|
Up to 12 2.5-inch or 3.5-inch SAS hot-plug hard
|
|
drives (12.0 Gb/s) at speeds of 7.2K, 10K or 15K
|
|
rpm
|
SATA hard drives
|
|
Up to 8/12 2.5-inch or 3.5-inch SATA hot-plug hard
|
|
drives (6.0 Gb/s) at speeds of 7.2K or 10K rpm
|
|
|
|
|
JBOD Controller Modules
|
|
Expander board
|
1 module
|
|
Sensors
|
1 sensor on the expander board
|
|
|
|
|
|
|
|
Backplane Board
|
Connectors
|
|
12 x SAS hard-drive connectors
|
|
1 x Power supply connector
|
|
2 x Cooling fan module connectors
|
|
1 x Sets of expander board connector
|
|
|
|
|
LED Indicators
|
Hard-drive carrier
|
|
1 x Blue single-color activity LED
|
|
1 x Two-color LED status indicator per drive
|
Expander board
|
|
2 x One-color LED status indicators for each SAS
|
|
host port, one for SAS host port link and one for
|
|
the activity status
|
|
2 x One-color LED status indicators for each SAS
|
|
expansion port, one for SAS expansion port link
|
|
and one for the activity state
|
|
|
Controller Back-Panel Connectors
|
I/O connectors
|
|
2 x SFF-8644 "Host In" connectors for connection to
|
|
the host
|
|
|
|
|
|
2 x SFF-8644 "Expansion Out" connectors for
|
|
expansion to an additional JBOD enclosure
|
Management connector
|
|
1 x 6-pin UART RJ-11 connector
|
|
1 x RJ-45 LAN connector (manufacture manager
|
|
only)
|
|
|
|
|
|
Power Supply
|
|
Voltage 90–256 V rated
|
|
Frequency 50–60 Hz
|
|
|
|
|
|
Cooling Fan
|
|
Speed
|
2 X 2700rpm/brushless fan
|
|
Amperage
|
2 X 0.135A
|
|
|
|
|
|
Environmental
|
Temperature
|
|
Operating
|
0° to 40°C
|
|
Storage
|
–40° to 60°C
|
Relative humidity
|
|
Operating
|
10% to 80% (non-condensing)
|
|
Storage
|
5% to 95% (non-condensing)
|
|